Specializing in Ventless Gas Fireplaces and Ventless Fireplace Inserts
Selecting the Right Ventless (Vent-Free) Gas Heating Appliance for Your Home
Vent Free gas heating may be the answer to your zone heating needs, but check with your local code official before buying.
Most states in the U.S. now allow for the sale and installation of ventless gas products. However, there are 45,000 different code officials in the country, and some areas have not changed their codes to the new International "I" codes and may be in the process of doing so. Because counties and municipalities may adopt different codes than state agencies, please check with your salesperson, installer, or local codes officials to determine the current code in the city where you plan to install the appliance.
Also double-check with your retailer before installing a ventless heating appliance in:
- An extremely tight home - if your home shows symptoms of inadequate ventilation (moisture on the insides of windows, mildew, and the shower or bath humidity lingers), more ventilation may be required prior to adding additional ventless gas appliances. Also, if you have an extremely tight new home, talk with your builder or contractor to make sure your home is properly ventilated;
- Homes at high altitude (i.e., homes at 4,500 feet above sea level or higher) - homes in higher altitudes may experience nuisance pilot outage and flame shutdown due to lower atmospheric pressure. Homeowners in these areas should check with their local codes officials.
- State of Massachusetts - if you buy a unit in Massachusetts, be sure to get a copy of the Massachuetts Regulations from your retail store prior to installation. This is the 49th state to allow for ventless products and special permits are required.
Who sets the standards?
The American National Standards Institute - known as ANSI - maintains a strict standard for ventless gas heating appliances. The standard, called ANSI Z21.11.2, is updated constantly to provide for product safety and performance, based on the latest technology.
How do I know that a gas product meets ANSI standards?
When shopping for your ventless gas products, always be sure the models you are considering are certified as complying with the ANSI Z21.11.2 standard by a nationally recognized laboratory.
NATIONAL MODEL CODES/CODE GROUPS
The following seven model codes/code groups permit the installation of listed ventless gas products:
- National Fire Protection Association (NFPA)
- Building Officials and Code Administrators (BOCA)
- Southern Building Code Congress International (SBCCI)
- Council of American Building Officials (CABO)
- International Mechanical Code (IMC)
- International Fuel Gas Code (IFGC)
- International Residential Code (IRC)
What Size (Btuh) Vent-Free Gas Heating Appliance Should I Choose?
Because there are broad temperature ranges in all regions of the country, the desired heat output from a ventless gas appliance will vary dramatically based on the season and usage patterns of the household. All ventless gas products offer a range of heat settings, whether manually or thermostatically controlled. In terms of indoor air quality, any size of product can be chosen based on personal preference in all applications other than in the exception described in heating Region V.
If you live in the state of New York, be sure to ask your dealer to give you a set of sizing guidelines for New York State. If not available, contact the Alliance office.
INSTALLATION OF VENT-FREE GAS PRODUCTS MUST MEET THE GUIDELINES OF THE NATIONAL FUEL GAS CODE VENTILATION REQUIREMENTS, AS IS THE CASE FOR ALL GAS APPLIANCES.
- INFORMATION THAT THE CONSUMER MUST PROVIDE:
- a - Determine the volume of space to be heated in cubic feet. This space may be a single room, or it may be connecting rooms or areas.
- b - Select the house construction: loose, average or tight.
- c - Select the type of heater control system desired: thermostatic or manual operation.
- d - Determine the region of the country where the house is located.
- a - Find the heater input rate (in Btuh/ft3) from Table A according to the above information from 1b, 1c and 1d.
- b - Multiply this value from Table A by the volume of space from 1a. This result will provide a minimum heater input (in Btuh) to ensure human comfort under a range of operating conditions.
Research Shows What Customers Already Know
All homeowners want to be certain that their home appliances meet nationally recognized guidelines for indoor air quality (IAQ) and do not emit excessive humidity. That's why the Vent-Free Gas Products Alliance - a coalition of members of the Vent-Free Gas Products Division of GAMA, an association of appliance and equipment manufacturers - commissioned independent testing of ventless gas products by two of the nation's leading testing firms. The research findings are as follows.
INDEPENDENT RESEARCH ON VENT-FREE GAS PRODUCTS AND INDOOR AIR QUALITY
To document how ventless gas products affect indoor air quality, the American Gas Association Research (AGAR) Laboratories performed an extensive, independent scientific study. They ran trials with real ventless products in a real home - the AGAR research and demonstration house.
AGAR scientists tested the levels of all five major contributors of indoor air quality - oxygen, carbon monoxide, carbon dioxide, nitrogen dioxide, and water vapor (humidity) - against the latest indoor air quality guidelines and recommendations.
The researchers concluded that ventless gas heating products performed well within nationally recognized guidelines for indoor air quality.
The table below shows how ventless gas products per-form compared to national indoor air quality guidelines and standards.
This research proves that ventless gas heating products meet applicable emissions requirements, even when used over extended time periods, among sensitive populations, and with oversized units.
Independent Research On Vent-Free Gas Products And Humidity
Most people are aware that sustained high humidity can encourage mold growth. But what causes sustained high humidity in a home? To answer this question regarding ventfree supplemental gas heating products, the Vent-Free Gas Products Alliance decided to find out once and for all.
The Alliance commissioned an independent research study to get the answer. The study, titled Impacts Of Vent-Free Gas Heating Products On Indoor Relative Humidity, was designed to address the following question: "Do ventless gas heating products generate enough water vapor to raise indoor relative humidity levels high enough to foster mold growth?"
The rigorous and comprehensive study was completed in December 2002 by risksciences, LLC, an independent scientific consulting firm nationally recognized for its expertise in human exposure modeling in residential environments. The research study concluded:
For the vast majority of homes in the U.S., ventfree gas heating products DO NOT generate enough water vapor to raise indoor humidity levels high enough to foster mold growth.
Furthermore, the findings indicated that greater emphasis should be placed on other factors that can cause humidity levels to exceed mold formation thresholds, such as aging homes, outdated construction, poorly sealed or leaky windows, wall insulation, insufficient ventilation, and maintenance of air conditioning systems.
See the table below for the results of the research study on ventless gas products and humidity - and breathe easy.